EVS IPDirector Version 4.3 - October 2007 Part 2 User's Manual - Manual (Page 37)

Issue 4.3.C IP Director Version 4.3 – User Manual – Part 2 – Logging and Browsing
EVS Broadcast Equipment
24
• To add a new value in a drop-down list, select the
+ sign beside the field, enter the new keyword and
click OK. Select then the new value.
Any new log entry created afterwards will have automatic
keywords assigned as they have been modified.
1.6.5 H
OW TO
A
SSIGN A
P
LAYBACK
C
HANNEL
F
OR
U
SE
W
ITH
IP L
OGGER
If a default player channel is defined in IP Director, it will
directly be assigned to the IP Logger when you open the
application.
Otherwise, you can assign the playback channel for use in IP
Logger in the following way:
1. Open the Channel Explorer.
2. In the Channel Explorer, select the player channel to
assign to the log sheet.
3. Drag the player channel to the log sheet into the bar at
the bottom of the IP Logger.
The channel name will then appear in green in this area.
Additionally, the player area will become active and show the
timecode of the selected channel in green. If the channel is in an
E/E mode, it will be the same as the LIVE area timecode.