17 how to modify the t/c in or the date of a clip, How to modify the t/c in or the date of a clip, 17 h – EVS IPDirector Version 4.3 - October 2007 Part 2 User's Manual User Manual
Page 82: Ow to, Odify the, Ate of a
IP Director Version 4.3 – User Manual – Part 2: Logging and Browsing
EVS Broadcast Equipment
Issue 4.3.C
69
3.2.17 H
OW TO
M
ODIFY THE
T/C
IN OR THE
D
ATE OF A
C
LIP
The T/C and date corresponding to the IN point of a clip can be
modified from the clip contextual menu. This operation is very
useful when re-ingesting a feed which must then be associated
to a log sheet, or simply because the A/V material ingested
corresponds to A/V material which was originally recorded at a
different T/C and date.
To modify the T/C IN or Date of a clip, proceed as follows:
1.
Right-click the clip in the Database Explorer.
2.
Select the Modify T/C IN or Date option from the
contextual menu.
This opens the following window:
3.
Type the new Timecode IN with the format HH:MM:SS:CS
in the IN field, if requested.
4.
Select the new Date for the clip in the Date In drop-down
list.
5.
Click the Save button to save the changes.