Herman Miller Embody Chairs - Disassembly For Recycling - Manual (Page 3)

Z
© 2012 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Embody, Co/Struc and Mirra are among the registered trademarks of Herman Miller, Inc.
TM Sense, Setu, Tu and SAYL are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products. 3
Part no. 1b9vtc rev A.
10. Remove both lower back
bolts using T-40 torx wrench.
9. Remove both lower spine
bolts using T-40 torx wrench.
7. Pry up gently until no
arm plug attachment is
loose.
8. Pull to remove no arm
plug. Repeat for opposite
side.
No Arm Plugs: