Herman Miller Embody Chairs - Disassembly For Recycling User Manual
Page 9
Z
© 2012 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Embody, Co/Struc and Mirra are among the registered trademarks of Herman Miller, Inc.
TM
Sense, Setu, Tu and SAYL are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
9
Part no. 1b9vtc rev A.
32. Remove single lower
bolt from each arm housing
using T-27 torx wrench.
Repeat for opposite side.
33. Remove two lower front
link shoulder bolts and
bushings using T-40 torx
wrench.
34. Pull lower cover forward
to remove.
31. Remove weldment from
seat assembly.