High Lifter Lift Kit for Honda Rancher 400AT (03-07) - Manual (Page 2)

High
Lifter Products, Inc. Ph# 318-542-2270
780 N Professional Drive Fax 318-524-2297
Shreveport, LA 71105
Honda 350 Rancher Lift Kit Installation Instructions
READ BEFORE INSTALLATION!
This product is designed for use on ATVs on which additional ground clearance and
fender clearance is desired. It is designed for utility type, slower-speed use on
relatively flat terrain in deep mud or snow. Although we have many thousands of
satisfied lift kit customers and over 400 franchised dealers selling and installing lift
kits, purchasers should be aware that use of this product may increase the
frequency of required maintenance, part wear, and will raise the center of gravity
on your ATV increasing risk of roll-over on side hills, ditches or other steep terrain.
We recommend that wider tires and/or wheel spacers be used to achieve a wider
stance and to improve stability of the ATV. Riders should be advised that the
handling characteristics of a taller ATV are different and require extra care when
riding on side hills or off-camber situations. If you further raise the center of gravity
by adding heavy loads to racks or seats, the ATV must be operated with care, at
slower speeds or on relatively flat ground.
Operation of an ATV with or without a lift kit, while or shortly after consuming
alcohol or drugs, subjects the rider to the risk of serious bodily harm or possible
death. This is compounded if the rider does not wear an approved helmet and other
safety gear. High Lifter urges that all approved safety gear be worn when riding an
ATV.
If this is not what you expected, or is not consistent with your intended use, you
should return the product immediately to the seller, before installation, for a refund
of the purchase price; less any fees. After installation, product is warranted for 90
days for defects in workmanship and materials. Warranty is limited to refund of the
purchase price or replacement of the kit, at the seller’s option.