KC HiLiTES KC #1133 Replacement KC Fog Lights on Jeep Wrangler 97 - 06 Instructions User Manual
23 year warranty
KC HiLiTES, Inc. 2843 W. Avenida de Luces, Williams, Arizona 86046-0155 * 800-528-0950 * www.kchilites.com
KC3264R - rev 120805
factory light so the hole in the bumper must be drilled
Thanks for choosing a KC HiLiTES product. We
out to 10mm or 13/32”.
take pride in building the highest quality, best
3. Mount the light on the bumper in the newly drilled
engineered systems possible. Your satisfaction
hole. Plug the light into the factory harness.
with our product is important, so if you have any
4. Aim your fog light so the beam pattern shines just
questions, please call our customer service line at
below your headlight low beams.
800-528-0950.
5. You’re Done!
The enclosed KC fog light is intended to replace the
If you are installing two new lights, repeat the procedure
factory fog light and utilize the Jeep factory wiring that
for the second light.
came with the vehicle.
Follow these few simple steps and you will have your
23 Year Warranty
lights working in no time at all.
See details on our website at
www.kchilites.com
MOUNTING & AIMING...
1. If you are replacing a Jeep Factory light, unplug it
from the harness and remove it from the vehicle.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS, PLEASE
CALL CUSTOMER SERVICE AT 800-528-0950
2. Your new KC fog light has a larger bolt than the Jeep
Mounting Instructions
for KC 1130, 1131, 1132 & 1133
Replacement KC Fog Lights
on Jeep Wrangler 97 - 06