M&C TechGroup PSP4000-H_C_T Operator's manual - Manual (Page 8)

8
Gas sampling and gas conditioning technology 2-2.1-ME
9 TECHNICAL DATA
Probe series SP®
portable version
PSP4000
PSP4000-H PSP4000-H / C PSP4000-H /C /T
Part No. 230V 40S1000 40S1005 40S1015
Part No. 115V 40S1000a 40S1005a 40S1015a
Sample temperature max. 600 °C *standard
Sample pressure max. 1 bar
Ambient temperature -20 °C to +60 °C
Filtration chamber
volume 40 cm
3
Filter element S-2K ceramic , 2 μm
Probe temperature Adjustable between 100-180 °C, pre-set at works to 180°C
Ready for operation After approximately 30 minutes
Gas inlet Basic connection G 3/8"i, probe tube or adapters optional
Gas outlet 1/8" NPT + tube connector ø 6 mm (optional ø 8 mm)
and pipe clamp for attachment of heated sample line
Power supply 220-240V 50/60Hz, 200 W or 115V 60Hz
Electrical connection Plug and socket connector 7 pin with 4 meter connection cable
Electrical equipment
standard EN 61010, EN 60519-1
System of protection IP40, EN 60529
Material Stainless steel 316Ti, ceramic, FPM
Weight 3 kg
Calibration gas
connection for
SS-tube/Plastic
hose ø 6 mm no yes yes
Temperature
measurement with
Thermocouple sensor
FeCuNi, length 600 mm
with 4 m connection
cable and standard plug. no no yes