M&C TechGroup PSP4000-H_C_T Operator's manual - Manual (Page 9)

9
Gas sampling and gas conditioning technology 2-2.1-ME
9.1 OPTIONS
Part No.
40S9130 extra price for PSP4000-H.. with sample outlet ø 8 mm tube connector
40S9100
extra price for PSP4000-H /FW with special filter cartridge filled with special spun glass with
M12-connection, material SS316Ti, FPM
sample adapter with variable probe tube length:
40S9005 3/8" adapter fitting with gasket and 8 mm PTFE sealing ring
40S9000
adapter with cone-shaped part for openings of ø 10-20 mm and ø 8 mm probe tube out of
stainless steel 316, extensible 80-200 mm
40S9010
ø 8 mm probe tube out of stainless steel 316Ti with position indication, for extensible probe
length of 190-300 mm.
fixed probe tubes with male connector G 3/8", length 1 m:
40S9020 Material: stainless steel SS316Ti, ø 6 mm, max. 600 °C
40S9030 Material: stainless steel SS316Ti, ø 8 mm, max. 600 °C
40S9040 Material: stainless steel SS316Ti, ø 10 mm, max. 600 °C
40S9050 Material: stainless steel SS316Ti, ø 12 mm, max. 600 °C
40S9108 Material: Titane, ø 6mm, max. 400 °C
40S9109 Material: Hastelloy® C, ø 6/8 mm, max. 900 °C
40S9112 Material: Inconell® 625, ø 12 mm, max. 1200 °C
40S9106 Material: Kanthal®, ø 15 mm, max. 1300 °C
40S9110
Material: Ceramic-Aluminium-Oxyd 1), ø 12 mm, max. 1800 °C, for mounting tube adapter
PSP4000H/AO Art. Nr. 40S9111 is necessary
40S9111 Tube adapter PSP4000H/AO, material: stainless steel SS316Ti
heated sample probe tubes SP34-H...:
40S9115 heated sample probe tube SP34-H with incorporated thermostate
40S9120 heated sample probe tube SP34-H1.1 with thermocouple sensor FeCuNi
40S9125 heated sample probe tube SP34-H2 with PT100 sensor
equipment, out of stainless steel SS316Ti for placing the probe stationary:
40S9060 intermediate connection adapter G3/4"o - G3/8"i / 8 ø with gasket 3/8".
40S9070 connection mounting nipple of R 2"o. DIN 2999/1 with G 3/4"i und G 3/8"i
40S9080 mounting flange DN65 PN6 B with thread connection 3/4"i ISO and gasket
90S2075 flange gasket set for DN65 PN6 B consisting of Klingerit gasket and screws M12
heated sample line PSP4M4/6 spec. made for probe PSP4000H:
01B4034
beginning connection part I with pipe end, for interchangeable tube 4/6, incl. PT100 and 1,5 m
extension cable axial at the back, with 7 pins plug
01B4037
end connection part K with spec. pipe end, for interchangeable tube 4/6, 0,5 m extension cable
axial at the back, with 7 pins connector
01B4036
per meter heated sample line PSP4M4/6, operating temperatures max. 200 °C with
exchangeable PTFE hose 4/6 mm to jut out 0,5 m (cold end), incl. 3 extra wire for the probe
heater, PT100 position 0,6 m mounted from electrical inlet Silicone foam heat insulation with
Nylon net, power 220-240V 50/60Hz, 110W/m
Max. 12 meter length at 230V/50Hz and 6 meter length at 115V/60Hz for PSS-5..-conditioing
system with internal temperature regulator
01B4034W
beginning connection part I for sample line PSP-W4M4/6 with pipe end, for interchangeable tube
4/6, incl. PT100 and 1,5 m extension cable axial at the back, with 7 pins plug
01B4037W
end connection part K for sample line PSP-W4M4/6 with spec. pipe end, for interchangeable
tube 4/6, 0,5 m extension cable axial at the back, with 7 pins connector
01B4036W
per meter heated sample line PSP-W4M4/6, operating temperatures max. 200 °C with
exchangeable PTFE hose 4/6 mm to jut out 0,5 m (cold end), incl. 3 extra wire for the probe
heater, PT100 position 0,6 m mounted from electrical inlet. Silicone foam heat insulation with
corrugated hose envelope out of PA, power 220-240V 50/60Hz, 110W/m.
Max. 10 meter length at 230V/50Hz and 6 meter lenfth at 115V/60Hz for PSS-5..-conditioing
system with internal temperature regulator
40S9090
aluminium-composite carrying case PSP to take portable gas sample probe PSP4000H... and
max. 5 m heated sample line PSP4M4/6 or max. 8 m PSP-W4M4/6, dimension 530 x 420 x 300
mm