Introduction and application, Serial numbers, Power supply – M&C TechGroup FT-...-H2 Operator's manual User Manual
Page 7: Warnings and instructions
7
Gas sampling and gas conditioning technology
5-2.1.1-ME
6
INTRODUCTION AND APPLICATION
The M&C electrically heated universal filter FT-
…-H2 reliably separates off solids, in particular
extremely fine particles, occurring in analysis techniques in gas filtration, using very fine, deep-acting
filter elements. It is constructed especially for hot gas analysis technique at 180°C.
6.1
SERIAL NUMBERS
The nameplates bearing the serial number are located on the mounting plate.
N O T E !
Always quote the device's serial number when making enquiries and
ordering replacement parts.
6.2
POWER SUPPLY
The universal filter series FT-
…-H2 can be operated on alternating current in the range from 230 to
240V, 50Hz or 115V, 60Hz.
6.3
WARNINGS AND INSTRUCTIONS
N O T E !
The instructions and warnings listed in the instructions for use must be
complied with!