Installation – Manhattan 172844 Smart Card Reader - Manual User Manual
Page 3
Advertising
![background image](/manuals/256075/3/background.png)
3
INSTALLATION
1. Plug the Smart Card Reader in to an active USB port. The green LED lights to
indicate there is power to the reader; the red LED flashes during the reading
process (once the installation procedure below is completed).
2. Insert the included setup CD in your CD/DVD drive. When the Welcome screen
displays, select the driver (as shown below) and click to advance to the next
screen.
3. When prompted, select your language preference from the drop-down menu.
Click “OK” to continue.
Advertising