Manhattan 179225 Hi-Speed USB 2.0 SVGA Converter - Manual - Manual (Page 9)

9
W
indoWs
V
ista
/7/8
1. Insert the enclosed driver CD into the CD-ROM drive. The setup
program should be launched automatically; if not, launch setup.exe
from your CD drive manually.
2. When the InstallShield
Wizard welcome
screen displays, click
“Next” to continue.
3. When the License
Agreement screen
displays, read it and
select “I accept the
terms of the license
agreement.” Click
“Next” to continue.
4. Setup is searching for
installed features.
5. When the InstallShield Wizard Complete screen displays, select
“Yes, I want to restart my computer now” and click “Finish” to
complete the driver installation.
6. After rebooting, plug the converter into an available USB port on
your PC or notebook. Connect the external display device (monitor/
projector) to the converter’s VGA (HD15) connector and switch it on.
The extended display will be shown on the second display device.