Manhattan 205146 USB to Serial Converter - Manual - Manual (Page 3)

3
INSTALLATION
As noted on Page 2, the following Installation procedure is for Win7.
The steps for other operating systems are similar.
1. Before plugging the converter in to the computer, load the included
driver CD and double-click “PL-2303 Driver Installer Program” to
display the Welcome screen of the InstallShield Wizard. Click Next.
2. The Setup Status screen will display to indicate the progress of the
installation. When the InstallShield Wizard Complete screen (below)
displays, click Finish. Note: If you inadvertently connected the
converter to the PC while running the driver installation, unplug it
and re-connect so the system can detect it.