Manhattan 177146 HDMI Splitter - Manual - Manual (Page 2)

Thank you for purchasing the MANHATTAN ® HDMI Splitter, Model
177146 (4-port) or 177153 (8-Port).
Follow the simple steps below and you’ll soon be enjoying the benefits
of these High Definition Multimedia Interface features:
• Duplicates a high-definition digital audio/video signal for up to four
(Model 177146) or eight (Model 177153) HDMI outputs
• Delivers a sharp, clear signal from DVD and Blu-ray players, set-top
box, satellite receiver and other sources
• Fully HDCP compliant to protect high-definition content transmissions
and ensure quality reception
• Cascade up to three levels to expand signal distribution to more displays
• Easy to install — requires no configuration
• Lifetime Warranty
Setup
1. Plug your HDMI input source and output devices into the corresponding
ports on the rear panel of the HDMI Splitter (HDMI cables not included).
2. Connect the included power adapter to the DC Input jack on the rear
panel of the splitter, then plug the power adapter into an AC outlet.
3. Turn the power on. (The power switch is on the front panel.)

Output ports (4 or 8) Input port (1) Power adapter jack