Manhattan 178235 Viva Wireless Mouse - Quick Install (Multi) - Manual (Page 2)

2
ENGLISH
Viva Wireless Mouse English
Installation
1. Press the cover release and remove the battery compartment cover.
Unwrap and then insert the two included AAA batteries, then replace the
cover.
2. Set the Power switch to On. The LED will light for a moment to indicate the
mouse is in Discovery mode.
3. Activate your device’s Bluetooth utility (built into the operating system or
third-party) and follow the Bluetooth procedure of your device to pair the
mouse.
Note: This product utilizes the latest in Bluetooth wireless
technology; wireless performance may vary from device to device. If using
this product with a Mac or PC, ensure that your Bluetooth driver is up to
date. If it isn’t, visit your computer manufacturer’s website for details and
updates.
4. Press the Connect button 2-3 seconds (until the LED blinks slowly).
5. Depending on your Bluetooth application, you may need to click or select
such on-screen prompts and options as “Set Up Bluetooth Device” and
“Continue” (once the mouse appears on your list of Bluetooth devices).
Operation
• Make sure the mouse is within the effective operating range of 10 m.
• Press the DPI button to cycle through the 3 resolution settings. The LED blinks
once to indicate 1000 dpi (also the default setting); twice for 1500 dpi; three
times for 2000 dpi.
• The mouse will enter Sleep mode after 8 minutes of inactivity. To take the
mouse out of Sleep mode, just press any button on the mouse.
• The LED will flash to indicate the batteries need to be replaced.
• For specifications, go to manhattan-products.com.
Connect
Power
Cover release
Sensor
LED
Scroll wheel
DPI
Cover
Batteries