Manhattan 130295 Drive Enclosure - Manual - Manual (Page 3)

3
1. Remove the 4 screws on the bottom of the enclosure ( A) and lift off the top (B).
2. Connect the hard drive to the SATA data and power connectors on the
enclosure, then secure it to the enclosure using the included screws ( C).
3. Re-assemble the enclosure ( D) using the 4 screws in Step 1.
4. Using the included USB cable, connect the enclosure to a USB port on the
computer.
Once the enclosure is connected to your PC, your system will automatically detect
the new hardware and complete the setup, confirmed when “USB Mass Storage
Device” displays in the Device Manager folder.
SOFTWARE INSTALLATION
These steps are for the installation of the convenient one-touch backup software.
NOTE: This software doesn’t support Mac operating systems. Some images may
look different on your computer, as your software version may be slightly different
than the one represented here.
1. Load the included software CD. The
Prolific Backup program’s InstallShield
Wizard Welcome screen will display
automatically. Click Next to continue.
2. When the wizard’s Complete screen
displays, click Finish.
NOTE: Most screens present the
option of clicking Back to return to a
previous screen or Quit to stop the
installation procedure.