Manhattan 177603 2D Barcode Scanner - Manual - Manual (Page 33)

33
memory. At any time, you can reset to factory defaults by scanning the Set
Factory Default code (see Section 6.1.1).
6.5 aUStraLian poSt SettingS
6.5.1 SyMBoLogy iDentifier
6.6 aztec SettingS
6.6.1 StrUctUre appenD MoDe
6.6.2 aztec rUneS
PROGRAMMING CODES
<UDSI-Default “P3”>
Active
<Code Mark-Default “*”>
<Not Active>
Active
<Not Active>