Manhattan 177603 2D Barcode Scanner - Manual - Manual (Page 69)

69
CHAPTER TITLE
6.37.2 poStaMBLe
The scanner can be programmed to output barcode data based on the format
[BAR CODE DATA] [POSTAMBLE STRING]. To send <ETX> after the barcode, for
example, scan only programming code <ETX> and the resulting barcode
output will be [BAR CODE DATA] [<ETX>].
PROGRAMMING CODES
<Preamble None>
<STX>
Postamble None
<CR+LF>
CR
LF
<ETX>