Naxa NT-50 - Manual (Page 14)

13
5. PROGRAM CONTROL
-Press up or down button to select this item.
-Press ENTER button to enter the PROGRAM CONTROL menu, then the screen will display
the following picture.
- There need input password "0000" in order for the child not to change any settings.
- If password is invalid, input numbers are cleared and you could input password again; when
password is valid, enter the menu automatically.
- Then press up/down button to choose the item you want to set. And press left/right button to
switch items on or off.
RRT Setting
- Press RESET is for resetting RRT information
Movie Ratings
- After enter the PROGRAM CONTROL, press UP/DOWN key to enter the Movie Ratings
sub-menu and select the rating you want by pressing UP/DOWN button.
- Press LEFT/RIGHT button to switch the check box between view and block and the default
mode is View.
Note: Blocking a rating affects all the higher ratings, so that blocking R in the example above
automatically blocks NC-17 and X, whatever previous state of these ratings was. If a password
is defined while a TV program warning is received for the current channel, sound is muted and
the following menu is displayed on the centre of screen; what's more, the rating information
should be consistent with current active program rating.
USA TV Ratings:
-Enter USA TV Content Ratings sub-menu and then press UP/DOWN button to select previous
item or next item.
Note: Blocking a rating affects all the higher ratings, so that blocking PG in the example above
automatically blocks 14+ and MA, whatever previous state of these ratings was. If a password
is defined while a TV program warning is received for the current channel, sound is muted and
the following menu is displayed on the centre of screen, what is more, the rating information
should be consistent with current active program rating.
Canada English:
- Press left/right button to switch the check box between view and block.
- Press up/down button to select previous item or next item.
Note: Blocking a rating affects all the higher ratings, so that blocking PG in the example above
automatically blocks 14+ and 18+, whatever previous state of these ratings was. If a password
is defined while a TV program warning is received for the current channel, sound is muted and
the following menu is displayed on the centre of screen, what is more, the rating information
should be consistent with current active program rating.
Block Enable Unrated
- Press the LEFT/RIGHT button to switch between OFF and ON. If you want to set the
following items, you must switch these two buttons on.