Naxa NT-50 - Manual (Page 16)

15
Specifications
1. Input Resistance : 75 Ω
2. Power Consumption: ≤9.6W
3. Standby Power Consumption: ≤0.5W
4. Power Source: AC adaptor or car adaptor（normal: DC 12V
0.8A)
5. Measurement: 205(L)X130(W)X40(D)mm
6. Weight: Approx.500g
7. Connection terminals:
1. Antenna Jack
2. AV Jack
3. External Power Source Input Jack
Specifications are subject to change without notice.
MAINTENANCE
Be sure to press STANDBY to set the player to the standby mode and disconnect
the AC adaptor before maintaining the player.
Wipe the player with a dry, soft cloth.
If the surfaces are extremely dirty ,wipe clean with a cloth which has been
dipped in a weak soap-and-water solution and wrung out thoroughly, and then
wipe again with a dry cloth.
Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. And do
not use compressed air to remove dust