Naxa NDL-400 - Manual (Page 9)

Menu Language: it is used to change menu language.
Color mode: it is used to change the color mode of screen.
Zoom Mode: it is used to select the display type.
Closed Caption: it is used to select the broadcasting program
provides closed caption. There are three options as below:
CC mode: use to select on, CC on Mute, off.
Basic Selection: select among from CC1, Cc2, CC3,
CC4,Text1, Text2, Text3 and Text4.
Restore Default: select this option to restore the factory setting.
Advance Selection: service 1, Service 2, Service 3, Service 4,
Service 5, Service 6.
Antenna: it is used to select the Antenna type CATV or air.
Auto Scan: use this function to auto scanning and stored tuned
channels. Select auto scan option, then press NAVIGATION
RIGHT button to access the submenu, select the desired Cable
system and then enter the Start to Scan option to begin auto
scan.
Show/Hide: it is used to show or hide the programs according to
your own favorite.
Channel No.: Select the desired program from this option.
Channel Label: it is used to edit the name of the selected
program (Use up or down button to input symbol or letter as
desired, and press left or right button to enter the previous or
next item).
Antenna
Auto Scan
Show/Hide
Channel No.
Channel Label
Air
UP/DOWN ADJUST MENU:EXIT
English
Normal
UP/DOWN ADJUST MENU:EXIT
Menu Language
Color Mode
Closed Caption
Restore Default
Zoom Mode Wide
Picture mode: it is used to select the desired picture mode.
Contrast: it is used to adjust the contrast effect according to
your own favorite.
Brightness: it is used to adjust the brightness effect according
to your own favorite.
Sharpness: it is used to adjust the sharpness according to your
own favorite.
Tint: it is used to adjust the tint effect according to your own
favorite.
Color: it is used to adjust the color according to your own
favorite.
Balance: it is used to adjust the balance effect according to your
own favorite.
Audio language: it is used to select the desired audio output
language.
Picture Mode
Contrast
Brightness
Sharpness
Tint
Color
Personal
62
53
50
0
60
UP/DOWN ADJUST MENU:EXIT
0
English
UP/DOWN ADJUST MENU:EXIT
Balance
Audio Language
60 Sec
Off
Central
Off
----/--/-- --/--
UP/DOWN ADJUST MENU:EXIT
OSD Duration
Sleep Timer
Time Zone
Daylight Saving Time
Clock
OSD Duration: it is used to set the OSD display duration.
Sleep Timer: it is used to set the sleep timer to auto power off
the set.
Time Zone: it is used to select time zone from different region.
Daylight Saving time: it is used to advance one hour of the
daylight time in summer in order to save the power.
Clock: it is used to show code create date.
8