Naxa NPB-255 - Manual (Page 4)

Repeat the steps above to program more tracks. A maximum of 20 tracks for CD and 99
tracks for USB&MP3 can be programmed in memory in a preferred order.
Press PLAY/PAUSE button to begin programmed play in the preferred order after you are
done with programming. The player stops automatically after all programmed tracks are
played.
You may press STOP button to terminate programmed playback. In program stop mode,
press STOP button again to clear the programming; press PLAY/PAUSE button to begin
the programmed playback with the programming order identical with the previous one done.
This player is capable of MP3-CDs. It takes longer time for this player to read an MP3-CD
than it does CD-DA. Wait patiently while it is reading.
After an MP3-CD is successfully read, the total tracks number shows in the LCD. And a
second later, playback begins from the first track with the icon of "Mp3"showing on the
screen.
1. Press once the SKIP/SEARCH up button in music play to skip to the next track. To skip
to a specific track ahead, press this button several times.
2. Press once the SKIP/SEARCH down button in music play to skip to the previous track.
To skip to a specific track at back, press this button several times.
3. Press 10+ button once in play to skip to the track 10 tracks ahead, twice to skip to the
track 20 tracks ahead. You can reach the last track of the disc using this button.
4. Hold the SKIP/SEARCH up button in music play to search at quick rate for a specific
point to play.
5. Hold the SKIP/SEARCH down button in music play to search at quick rate for a specific
point to play.
To repeat a preferred track in playback, press MODE button once, the corresponding icon
of repeat a single track shows in the LCD. Then select the preferred track using
SKIP/SERCH buttons or 10+ button. The player will repeat the chosen track until you press
STOP button.
To repeat all tracks, press MODE button twice in play mode, the corresponding icon of
repeat all tracks shows in the LCD. The player will repeat all tracks until you press STOP
button.
Random play is that tracks on the disc are played by the player at random. Press MODE
button three times to enter this mode during play, the icon of random play shows in the LCD.
Tracks on the disc will be selected at random for playback and the player stops
automatically after all tracks are played.
MP3-CD PLAYBACK
SKIP TRACKS AND SEARCH FOR A SPECIFIC POINT TO PLAY
REPEAT A SINGLE TRACK (CD/USB/MP3)
REPEAT ALL TRACKS (CD/USB/MP3)
RANDOM PLAY (CD/USB/MP3)
You may press STOP button to exit random play
mode and press PLAY/PAUSE button to resume normal playback.
7 6
INTRODUCTION PLAY (CD/USB/MP3)
Introduction play is that the first ten seconds of each track are played in a sequential order.
Press MODE button four times to enter this mode during play, the icon of introduction play
shows in the LCD. Press SKIP/SEARCH up button in Introduction mode to begin
Introduction play from the next track immediately after the current track. Press
SKIP/SEARCH down button in Introduction mode to begin Introduction play from the
previous track. Press MODE button once more to exit introduction and return to normal
playback from the track the unit plays. Press Play/pause button to resume normal play from
the current track.
EXTERNAL MEMORY MEDIA OPERATION (USB)
Prepare the player for external memory media operation
VARIOUS PLAY MODES (USB)
Insert a USB data traveller into the USB port; slide the FUNCTION switch to the
CD/USB/AUX position and use STOP/USB button to switch to USB mode( in STOP mode).
Playback will start from the first track after reading the USB successfully.
SKIPPING TRACKS AND SEARCHING BETWEEN TRACKS
Press SKIP UP button once to skip the current track and play the next track, press this
button continuously to go to corresponding tracks ahead;
Press SKIP DOWN button once to skip the current track and go back to the previous track,
press this button continuously to go back to corresponding tracks at back.
Press and hold SKIP buttons to initiate high-rate scanning between tracks; release one of
them to begin playback of music at normal speed.
AUXILIARY IN
Your player can be used as a power amplifier to playback the programs from portable radio,
TV set or MP3 player or whatever provided this appliance is so designed that audio signal
may be produced through a LINE-OUT jack or the like.
Observe the following steps to connect the player to another appliance:
1. Power the player on using the supplied AC Power Cord.
2. Slide Function Switch to CD/USB/AUX position.
3. Connect the appliance into the player's AUX in jack with the supplied LINE OUT cable
of the appliance.
4. Power on the appliance and begin play.
Easy job, right? At this time you will be able to hear the sound produced from the programs
the connected appliance is broadcasting.
CAUTION
—
—
—
—
—
—
—
The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the apparatus.
Minimum distances 2.0cm around the apparatus for sufficient ventilation.
The ventilation should not be impeded by covering the ventilation openings with items,
such as newspapers, table-cloths, curtains, etc.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
When the mains plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
The use of apparatus is in tropical and/or moderate climates.
Attention should be drawn to the environmental aspects of battery disposal.