Naxa NPB-241 - Manual (Page 7)

6
CARE OF CASSETTE MECHANISM
Gently clean the tape head and pinch wheel/capstan assemblies after every 10 hours of using
the unit. A range of cassette care products are available.
The erase head and record/play head and the surface of the pinch roller are delicate and must
not be touched with metal objects such as screwdrivers. You may find it easier to clean the
assembly by pressing the PLAY button to bright head and pinch roller into view. Be sure to press
the STOP button after cleaning the mechanism.
Damage to the pinch wheel can occur if the unit is left in PLAY mode with the power switch off.
Under no circumstances should you attempt to lubricate any part of the machine.
USING THE CD
Discs for Playback
This system can playback all digital audio CD, finalized digital audio CD-Recordable (CD-R)
discs, finalized digital audio CD-Rewritable (CD-RW) discs, CD-DA format digital audio CD,
finalised digital audio CD-R/CD-RW discs.
LOADING A DISC
1. Set the FUNCTION switch to CD/AUX position.
2. Open the CD door by pressing CD door up lower right corner.
3. Place an audio CD into the disc tray with the label side facing up.
4. Close the CD door, the total number of tracks will appear in the display after several
seconds.
5. To remove the CD, lifting CD door up to open CD compartment lid, grasp the CD by its
edges, and carefully take it out.
Note:
z To ensure good system performance, wait until the disc tray completely reads the disc
before proceeding.
z If no disc loaded into the compartment, or the disc is place upside down or unreadable, the
display will show “ NO ”.
PLAYING A DISC
1. Press CD PLAY/PAUSE button to start playback. The playback starts from track 1, the CD
PLAY/PAUSE indicator inside the right lower corner of the display illuminates.
2. To interrupt playback, press the CD PLAY/PAUSE button. The CD PLAY/PAUSE indicator
flashes on and off.
3. To resume playback, press the CD PLAY/PAUSE button again, the CD PLAY/PAUSE
indicator becomes steady on the display.
4. To stop playback, press the CD STOP button, the total number of tracks appears in the
display.