Naxa NPB-241 - Manual (Page 8)

7
SELECTING A DESIRED TRACK/PASSAGE
To select a desired track
z Press CD SKIP/SEARCH FORWARD (NEXT)/BACKWARD button repeatedly in stop mode
or during playing until the desired track appears on the display.
z Press CD PLAY/PAUSE button to start play.
To search for a particular passage during playback (track scanning at high speed)
Press and hold CD SKIP/SEARCH BACKWARD/FORWARD button to scan the current playing
track at high speed until desired point (passage), then release the button.
Playback will start again from this point.
PROGRAM TRACKS
Program tracks of disc are possible when playback is stopped. Up to CD 20 tracks can be
stored in the memory in any order.
1. Press “PROGRAM” button, display will show “01” and flashing, Program indicator will light
up and flash.
2. Press CD SKIP/SEARCH FORWARD/BACKWARD button to select a track number.
3. Press the “PROGRAM” button to store the track number, display will show “1’”.
4. “ 02 ” flashes again. Repeat step (3) to (4) to program other desired tracks.
5. Press “PROGRAM” button once more after 20 track in programmed and all the programmed
track numbers will be shown one by one
6. Press CD PLAY/PAUSE button, playback will start from the first programmed track.
7. You can press CD SKIP/SEARCH FORWARD/BACKWARD button to select the track
number in memory.
8. Press the STOP button to stop program playback.
To Erase the Memory (Program)
To clear the program, you may have two ways:
1. Press CD STOP button when the disc stopped, or
2. Open the CD compartment lid, program will be erased.
REPEAT
You can play one track or all tracks on the disc repeatedly.
To Repeat a Single Track
1. Press CD REPEAT button once in play, CD REPEAT indicator will flashes on and off. The
current track will be played over and over again till you press STOP button.
2. To cancel repeat play, press CD REPEAT button twice. CD REPEAT indicator disappears.
To repeat all the Tracks
1. Press CD REPEAT button twice in play, CD REPEAT indicator becomes steady on, all tracks
on the disc will be played over and over again till you press STOP button.
2. To cancel repeat play, press CD REPEAT button once. CD REPEAT indicator disappears.
Note: Repeat function also can be done in stop mode.
RANDOM PLAY
Press the CD RANDOM button in Play/Stop mode, the current track number and “- - ” will
flashing again and again. And then press the CD PLAY/PAUSE button. Playback will start from
any one track (not in the order of the disc). To cancle the RANDOM, press the RANDOM button
again.