Naxa ND-842 - Manual (Page 11)

E: Connecting to an external decoder or a power amplifier
When DVD discs recorded in Dolby digital, MPEG audio or other formats are played, corresponding bit
stream is output from the player s COAXIAL digital audio output connector. When the player is
connected to an external decoder or a power amplifier, you can enjoy quality of theatre level at
your home!
,
CD
DVD
MP3
Sound
recording forma
Dolby digital
Linear PCM
Other
MP3
Digital output setting
PCM(44.1KHZ sampling)*1
Raw
OFF
PCM(44.1KHZ sampling)
PCM(44.1KHZ sampling)
PCM(44.1KHZ sampling)
*1 sound having 192KHz sampling is converted to
48HKZ sampling when it is output from the Coaxial
digital audio output connector.
Note: Please refer to the setup operations for setup
method.
For your reference:
Dolby Digital (AC-3),a digital sound compression
technique developed by the Dolby Laboratories
Licensing Corporation supports 5.1-channel surround
output and stereo sound system enables the capacity
of mass storage recorded in discs Linear PCM is a
signal-recording format used in CD s While CD s are
recorded in 44.1KHz/16bit, DVDs are 48KHz/16bit
up to 192KHz/24bit.
Caution for the coaxial audio output connector.
Do not connect an amplifier (with an Coaxial digital
input connector) which does not contain the Dolby
Digital (AC-3) or MPEG audio decoder, otherwise it
maybe harmful to your ears and damage your
speakers.
BASIC CONNECTION
DVD PLAYER
10
TV set(optional)
DVD/CD player
Coaxial audio
cord
Decoder of
amplifier with
Dolby digital
(AC-3) or MPEG
(optional)