Naxa ND-842 - Manual (Page 9)

8
BASIC CONNECTION
Ensure that the power switch of this unit and
other equipment to be connected is turned off
before commencing connection.
Read through the instructions before connecting
other equipment.
Ensure that you observe the colour-coding
when connecting audio and video cords.
A: Connecting to a stereo TV set
1. TV set (optional)
2. DVD/CD player
3. Connecting Video, R/L audio cords
4. To TV Audio input connection
5.DC power cord
To get the best viewing quality you are advised to
The TV set with Y,Pb/Cb,Pr/Cr input could get more
clear picture and realistic image when connecting
to Y,Pb/Cb,Pr/Cr video position.
Recommendation: Set analog audio output
up 2 channels
B: Connection to monophonic TV
1. TV set (optional)
2. DVD/CD player
3. Audio cords
4. To TV set audio input connector
5. To TV set video input connector
6.Component connector cord (optional)
7.To TV component (Y,Pb/Cb,Pr/Cr)input connector
Note: User can choose the proper video
connection according to the TV set jacks and its
requirement (same as below)
C: Connection to audio equipment
1. Audio player (optional)
2. TV set (optional)
3. DVD/CD players
4. Video/audio cords
5. To TV video input connector (yellow)
6. To audio input connectors (red, white)
Recommendation: Set analogue audio output up to 2 channels
DVD PLAYER
1 B
1
A
1
2
C
2
3
2
3
4
5
4
3
5 7
6
5 6
4