Ohaus HEAVY DUTY MECHANICAL SCALES Manual - Manual (Page 3)

CARE AND MAINTENANCE
The following practices will ensure that your Heavy Duty Solution Balance will give
years of satisfactory and trouble-free service.
1. When not in use, remove any load from the Scale Plate and place the Slotted
Masses on the Mass Rack. Slide one of the Poises away from ZERO, so that
the Balance is not in equilibrium. This will stop the Balance from oscillating
and prevent unnecessary wear.
2. Use and store the Balance in places that are free from vibration, which can
cause unnecessary wear.
3. Keep the Balance clean at all times, being particularly careful to not let dirt
accumulate in the vicinity of the bearings. Never use oil, or any lubricant, on
the knives or bearings. Lubrication will reduce the readability and accuracy of
the Balance.
4. Occasionally, it will be necessary to clean accumulated debris from the Magnet
Faces in the base of the Trig Loop Post Assembly. Insert a piece of adhesive-
backed tape into the Magnet slot that the aluminum Damper Vane enters.
Press the tape against the Magnet Face with a ruler or a similar thin strip. Dirt
or magnetic particles will adhere to the tape when it is removed and the
Damper Vane will be able to oscillate freely.
Ohaus Part No. 127-MO: ACCESSORIES
Description
Slotted attachment Mass Set
1-10kg, 1-5kg, 2-2kg, 1-1kg
Stainless Steel Scoop
17.2 x 11 x 3.4 / 44 x 28 x 8.5
SPECIFICATIONS
Ohaus Part No. 80250954:
Model Weighing
Capacity
Beam weighing
range
Readability Tare
Platform type
and size (in/cm)
Dimensions
WxHxD (in/cm)
Carton size
WxHxD (in/cm)
Shipping wt
(lb/kg)
1119D 20kg 1100g 1g 2270g Stainless steel
11/27.9
34x11x11 /
86.36x27.94x27.94
36x12x10 /
91.44x27.94x25.4
44 / 19.9
LIMITED WARRANTY
Ohaus products are warranted against defects in materials and workmanship from the date of
delivery through the duration of the warranty period. During the warranty period Ohaus will
repair, or, at its option, replace any component(s) that proves to be defective at no charge,
provided that the product is returned, freight prepaid, to Ohaus.
This warranty does not apply if the product has been damaged by accident or misuse,
exposed to radioactive or corrosive materials, has foreign material penetrating to the inside of
the product, or as a result of service or modification by other than Ohaus. The warranty period
shall begin at the date of installation, or three months from shipment to the buyer, whichever
occurs first. A properly completed Warranty Registration Card must be received by Ohaus
within 30 days from date of purchase to initiate coverage under the warranty. No other
express or implied warranty is given by Ohaus Corporation. Ohaus Corporation shall not be
liable for any consequential damages.
As warranty legislation differs from state to state and country to country, please contact Ohaus
or your local Ohaus dealer for further details.