Ohaus RE PRICE COMPUTING COMPACT SCALES Manual - Manual (Page 10)

EN-8 RE Series
display will show the Tare as a negative net value (with the pan empty), and
the
PT and NET annunciators will turn on as the Tare weight is registered.
4.5.2 Recalling a Keyboard Tare
With the
PT annunciator on, press [>T<]. “ Pt ” and the pre-set tare value are
displayed. Press [>T<] again to return to normal weighing mode.
4.5.3 Clearing a Keyboard Tare
With the
PT annunciator on, press [>C<].
4.6 Weighing and Pricing
Place the item to be weighed on the pan, then enter the Unit Price via the
numeric keypad. The item weight will be shown in the Weight display, the
unit price in the Unit Price display, and the resulting total price in the Total
Price display.
The Unit Price and Total Price values are cleared automatically when the item
is removed from the pan (Unit Price will be retained if the scale is in Pre-pack
Mode – see Section 4.8).
4.7 Hold Function
After performing a price transaction (Section 4.6), press [HOLD] to keep the
Total Price displayed (the HOLD annunciator will turn on). Press [HOLD]
again to clear the display and return to normal weighing.
4.8 Pre-pack Weighing Function
When weighing and pricing items of the same price and/or tare value, enter
these values only once with the Pre-pack function.
1. Enter the Unit Price, and/or Keyboard Tare value (Section 4.5.1).
2. Press
[FIX]. The FIX annunciator will turn on.
3. Weigh and price items repeatedly without losing the Unit Price/Tare
values.
4. When pre-pack weighing is finished, press [C] to clear the values and
return to normal weighing.