Ohaus DEFENDER 3000 METAL WEIGHING INDICATOR Manual en - Manual (Page 6)

EN-4 3000 Series Indicators
1. INTRODUCTION
This manual contains installation, operation and maintenance instructions for the T32M Indicators. Please read this manual
completely before installation and operation.
1.1 Safety Precautions
• Verify that the input voltage range printed on the data label matches the local AC power to be used.
• Make sure that the power cord does not pose a potential obstacle or tripping hazard.
• Use only approved accessories and peripherals.
• Operate the equipment only under ambient conditions specified in these instructions.
• Disconnect the equipment from the power supply before cleaning.
• Do not operate the equipment in hazardous or unstable environments.
• Do not immerse the equipment in water or other liquids.
• Service should only be performed by authorized personnel.
For safe and dependable operation of this equipment, please comply with the following safety precautions: