Ohaus GT Series Electronic Balance - Manual (Page 87)

48
MENUS
Net Net Net Net Net
Weight shown on the display can be referred to as a zero value (gross value) or tare
value (net value). When enabled the display value also has GROSS/NET Indicator
turned ON, this feature will allow you to obtain a zero value by a long press on .
A short press is a tare.
Net Weight Net Weight Net Weight Net Weight Net Weight - the weight of a material or sample after deducting the weight of its
packaging or container with which it had previously been weighed.
Gross Weight Gross Weight Gross Weight Gross Weight Gross Weight - the weight of object or sample (Net Weight) including container or
packaging.
NOTE NOTE NOTE NOTE NOTE: When in a weighing mode, switches between Gross weight and
Net weight.
The Net function can be set either ON or OFF.
1. Access the menu under the Setup Options menu.
2. .
3. or .
4. .
Auto Tare Auto Tare Auto Tare Auto Tare Auto Tare
NOTE NOTE NOTE NOTE NOTE: Auto Tare is disabled for LFT.
To set Auto Tare feature ON or OFF, proceed as follows:
1. Remove any material from the platform.
2. Access the Auto Tare submenu under Setup Options
menu.
3. .
4. or .
5. .