HP iPAQ Glisten-AT&T - Manual (Page 177)

To perform a factory restore:
● Press Start , tap Settings > System > Factory Restore. Follow the instructions on the
screen to perform a factory restore.
The iPAQ restarts and turns on. If the factory restore is successful, you will see the words Clean
boot when the HP logo appears.
● If your iPAQ cannot boot to the Windows Mobile operating system, you can also try another
method to perform a factory restore. Hold down Send and End , and then press the power
button on the top of your iPAQ.
NOTE: A factory restore will not delete the data on your microSD card.
Miscellaneous 165