HP iPAQ Glisten-AT&T - Manual (Page 37)

6 Customize Settings
Name your HP iPAQ Glisten
Use the device name to identify your iPAQ in the following situations:
● When synchronizing with a computer.
● When connecting to a Wi-Fi network.
● To identify your iPAQ during Bluetooth pairing.
NOTE: If you synchronize multiple devices with the same computer, make sure you create a unique
name for each device.
To change the device name:
1. Press Start , and then tap Settings > System > About > Device ID tab.
2. In the Device name box, enter a name for the device. The device name must begin with a letter.
The device name can include letters from A to Z, numbers from 0 to 9, and the special character
underscore (_). The device name cannot contain spaces.
3. If you prefer, you can add a description to your phone. In the Description box, enter a description.
4. Tap OK.
NOTE: The default device name for your phone is HP_iPAQ_Glisten.
Enter owner information
Enter your personal information, such as your name and address, on your iPAQ so that it can be
returned if it is lost or misplaced.
1. Press Start , and then tap Settings > Personal > Owner Information.
2. On the Identification tab, enter your personal information.
3. On the Notes tab, enter your comments or any text that you want to display on the screen when
you turn on your device.
Name your HP iPAQ Glisten 25