Vitek VT-3528 BK - Manual (Page 4)

ENGLISH
4 4
c. Day set mode.
Display show day set mode.
Remark: Weekday will be recalculated after
every year, month or day is adjusted.
d. 12/24H set mode.
Display show 12/24H set mode
(Select 12H.)
Display show 12/24H set mode.
(Select 24H)
e. RTC Hour set mode.
Display show RTC Hour set mode.
f. RTC Min set mode.
Display show RTC minutes set mode.
Remark: Seconds will be reset after every min-
ute adjustment.
B. Setting Alarm 1 and Alarm 2.
Press alarm set button «AL» (2) and keep
depressed for 2 seconds to enter alarm set
mode. Press alarm set button «AL» (2) to
change the set mode cycle as follows:
Normal — Alarm 1 (hour) — Alarm 1 (min)
— Alarm 1 (day) — Alarm 2 (hour) — Alarm 2
(min) — Alarm 1 (day) — Normal.
Actions (during data adjustment):
- Keep depressed button
over 2 seconds
to adjust data backward.
- Keep depressed button over 2 seconds
to adjust data forward.
Alarm 1.
Display show hour setting mode.
Display show minute setting mode.
Display show DOW (day of the week) setting
mode (Mon to Fri).
Display show DOW (day of the week) setting
mode (Mon to Sun).
Display show DOW (day of the week) setting
mode (Mon to Sat).
Alarm 2
Display show hour setting mode.
3528IM.indd 4 3528IM.indd 4 24.11.2006 15:25:02 24.11.2006 15:25:02