Vitek VT-3521 - Manual (Page 3)

CLOCK RADIO WITH ALARM AND CD PLAYER
MODEL VT-3521
LOCATION OF CONTROL ELEMENTS
1. AUTO/OFF/ON SELECTOR
2. VOLUME/BUZZ DIAL
3. TIME SET BUTTON
4. ALARM SET BUTTON
5. SLEEP TIMER BUTTON
6. HOUR SET BUTTON
7. MINUTE SET BUTTON
8. LED DISPLAY
9. SNOOZE BUTTON/TIMER OFF
10.BAND SELECTOR (AM/FM)/CD)
11.TUNING KNOB
12.SPEAKER
13.HEADPHONES JACK
14.STEREO SIGNAL INDICATOR
15.REPEAT TRACK INDICATOR
16.PROGRAM INDICATOR
17.SKIP/SEARCH BACK BUTTON
18.SKIP/SEARCH FORWARD BUTTON
19.STOP BUTTON
20.PLAY/PAUSE BUTTON
21.REPEAT BUTTON
22.PLAYBACK PROGRAMMING BUTTON
23.DISPLAY BRIGHTNESS CONTROL
(DIMMER/BRIGHT)
24.BASS BOOST OFF/ON
25.TRACK NUMBER DISPLAY
26.EMERGENCY POWER BATTERY COMPART-
MENT
27.ALARM INDICATOR
AC POWER SUPPLY
Before connecting, make sure that the electrical
supply voltage is compatible with the device’s
voltage requirements.
CAREFUL
• Remove the AC plug from the outlet if the device
will not be used for a long period of time.
• Do not attempt to repair this device yourself;
there are no user-serviceable parts inside.
• Do not allow water to splash or spill onto the
device in order to avoid fire and electric shock.
• Do not obstruct the natural ventilation of the
device; do not place it in closed bookshelves or
on shelves were there is not good ventilation.
• Do not place sources of open flames, like can-
dles, on the device.
• In case of malfunction, contact an authorized
service center.
CLOCK
• Open the CD compartment lid, open the battery
compartment (26) and install one 6F-22 type 9V
battery (not included). The battery is used to
save information regarding the current time and
alarm settings in case of AC power interruption.
• Set the Auto/Off/On (1) selector to the Off posi-
tion and plug the power plug into the outlet; the
display will start to blink.
• To set the current time, press and hold the TIME
(3) button, then use the HOUR (6) and MIN (7)
buttons to set the current time.
SETTING THE ALARM TIME
• Press and hold the ALARM (4) button; use the
HOUR (6) and MIN (7) buttons to set the desired
alarm time.
WAKING UP TO THE RADIO
• Set the alarm time as instructed above.
• Set the Auto/Off/On (1) selector to the On posi-
tion.
• Set the band selector (10) to the desired band -
AM/FM, use the TUNING (11) dial to tune to the
desired radio station and make sure that the vol-
ume is set properly.
• Set the Auto/Off/On (1) selector to Auto; the
ALM (27) indicator will light. At the set alarm
time the radio will automatically activate.
Note: reception of radio stations in the 88 – 108
MHz band is in stereo; if the radio station is
tuned accurately, the ST (stereo) indicator (14)
will also light.
WAKING UP TO BUZZER ALARM
• Set the alarm time as indicated above.
• Rotate the VOLUME/BUZZ (2) dial counter-
clockwise until it clicks in order to activate the
BUZZ alarm mode.
• Set the Auto/Off/On (1) selector to Auto; the
ALM (27) indicator will light. The buzzer alarm
will activate at the set alarm time.
WAKING UP TO A CD
• Set the alarm time as indicated above.
• Set the selector (10) to CD.
• Set the Auto/Off/On (1) selector to Auto.
• Open the CD compartment and insert a com-
pact disc; close the CD compartment lid; set the
desired volume using the knob (2).
• At the set alarm time, the CD will begin playing.
TURNING OFF THE ALARM
• To turn off the alarm, press the ALARM (4) but-
ton once; the alarm will turn off and the set
alarm time is saved for the next day; the ALM
(27) indicator will stay lit.
• To turn the alarm off completely, set the
Auto/Off/On (1) selector to the Off position; the
ALM (27) indicator will disappear.
ENGLISH
3
3521.qxd 16.03.05 15:27 Page 3