Power-Sonic SAFETY DATA SHEET Power Sport Series Batteries - Manual

Power-Sonic MSDS Page 1 of 6
Continued on next page
MATERIAL SAFETY DATA SHEET
Maintenance Free and Conventional Power Sport Series Batteries
Section 1 - Product Identification
Section 2 - Hazardous Ingredients/Identity Information
Components CAS Number Approx Wt.
%
OSHA PEL
(µg/m³)
ACGIH TLV
(µ/m³)
NIOSH
(µ/m³)
Inorganic Lead/Lead Compounds 7439-92-1 65%-75% 50 150 10
Tin 7440-31-5 <0.5% 2000 2000 N/A
Calcium 7440-70-2 <0.1% N/A N/A N/A
Electrolyte: Dilute sulfuric Acid 7664-93-9 14-20% 1000 1000 1000
Fiberglass Separator - 5% N/A N/A N/A
Case Material: Acrylonitrile Butadine
Styrene (ABS)
9003-56-9 5-10% N/A N/A N/A
Inorganic lead and electrolyte (sulfuric acid) are the main components of every Valve Regulated Lead Acid battery supplied by
Power-Sonic Corporation. Other ingredients may be present dependent upon the specific battery type. For additional
information contact Power-Sonic Corporation.
Section 3 - Physical/Chemical Characteristics
Components Density Melting
Points
Solubility
(H2O)
Odor Appearance
Lead 11.34 621°F None None Silver-Gray
Lead Sulfate 6.20 1950°F 40mg/l (60°F) None White Powder
Lead Dioxide 9.40 554°F None None Brown Powder
Sulfuric Acid About 1.30 203-240°F 100% Sharp penetrating
pungent
Clear Colorless
Liquid
Fiberglass Separator N/A N/A Slight None White Fibrous
Case Material: Acrylonitrile Butadine
Styrene (ABS) N/A N/A None None Solid
Manufacturers Name
Power-Sonic Corporation,
7550 Panasonic Way
San Diego, CA 92154
Emergency Telephone Numbers:
CHEMTREC (Domestic): (800) 424-9300
CHEMTREC (International): (703) 527-3887
Telephone Number for Information
Power-Sonic Corporation: (619) 661-2020
Date Issued: July 1, 2009