RBP Chemical Technology J0145 RE-START 7001 User Manual

Re-start 7001, Product data sheet, Description

Advertising
background image

RBP Chemical Technology, Inc.

RBP Chemical Technology, Inc.

RBP Chemical Technology, Inc.

RBP Chemical Technology, Inc.

150 S. 118

th

Street P.O. Box 14069

Milwaukee, WI 53214-0069

www.rbpchemical.com

Corporate: 414-258-0911

Fax: 414-258-7908

RBP East: 508-865-0800

This product should be used only for its intended purpose. The information stated above is based on our laboratory tests and
experience, and is accurate to the best of our knowledge. Since actual use is beyond our control, the recommendations or
suggestions are made without warranty, expressed or implied.

Product Data Sheet

Date: 08/18/11

Supersedes: New

PRODUCT #: J0145

RE-START 7001

High-Performance Alkaline Plate Cleaner

Description:

Re-start 7001 is a water based alkaline plate cleaner that will effectively remove lint,
ink, and sensitivity from the printing plate. This product contains ingredients that will
desensitize the non-image area of the plate and provide clean, fast start-ups for
reduced paper waste. Re-start 7001 is easy to use, either by hand or spray and
contains negligible VOC’s and no phosphates.

Directions for Use:

Hand

– Apply Re-start 7001 to a clean dampened rag, cloth, or sponge. Wipe across

plate surface until ink and contaminants are removed.

Spray

– Squirt the Re-start 7001 onto the dampening roller while press is running to

clean the plate up on a re-start or start-up. Do not over use, as the excess water may
break the web.

Specifications:

Appearance:

Clear liquid

Density:

8.5 lbs/gal

VOC Content:

(EPA Method 24)

0.41 lbs/gal, 17 g/L, 2%

Flash Point:

> 212°F

Advertising