RBP Chemical Technology J5052 DRYING STIMULATOR User Manual

Drying stimulator, Product data sheet, Description

Advertising
background image

RBP Chemical Technology, Inc.

RBP Chemical Technology, Inc.

RBP Chemical Technology, Inc.

RBP Chemical Technology, Inc.

150 S. 118

th

Street P.O. Box 14069

Milwaukee, WI 53214-0069

www.rbpchemical.com

Corporate: 414-258-0911

Fax: 414-258-7908

RBP East: 508-865-0800

This product should be used only for its intended purpose. The information stated above is based on our laboratory tests and
experience, and is accurate to the best of our knowledge. Since actual use is beyond our control, the recommendations or
suggestions are made without warranty, expressed or implied.

Product Data Sheet

Date: 03/21/12

Supersedes: 08/18/11

PRODUCT #: J5052

DRYING STIMULATOR

Ink Drying Promoter

Description:

Specifically designed to promote the drying of conventional sheetfed inks. Extremely
effective in helping conventional sheetfed inks dry better on plastic and polyboard
type stocks.

Directions for Use:

Add 1/2 to 1 ounce per gallon of DRYING STIMULATOR to the press ready mix. The
press ready mix should not require more than 3 ounces per gallon to achieve desired
results. The pH will not be influenced by this additive. The conductivity of the
working solution may increase up to 300 micromhos per 1/2 ounce of DRYING
STIMULATOR
.

Specifications:

Appearance:

Clear purple liquid

Density:

8.9 lbs/gal

VOC Content:

(EPA Method 24)

None

Flash Point:

None

Advertising