Spicer Single Drive Axles Service Manual: S170, S190, S590 - Manual (Page 13)

9
Carrier A
ssembly
Carrier Assembly
6. Mount the differential carrier in a head stand with
the wheel differential facing upward.
Note: For easier disassembly, loosen but do not remove the
pinion nut.
7. Remove the carrier differential bearing cap
capscrews, flat washers and bearing caps.
8A. Use Spicer’s wheel diff. bearing adjustment tool
(part number 513061) to back off the threaded
cups and remove.
Before July 2013
8B. Using a long flat blade screwdriver on a pry bar,
back off one of the wheel diff. bearing adjusters
and remove.
After July 2013
9. Using a chain hoist and the proper strap, lift the
ring gear and wheel differential assembly from
the carrier.
1 - Threaded bearing cup
2 - Adjustment plate
1
2