Spicer Drive Axles Service Manual Single Axles 2-Speed & Double Reduction - Manual (Page 4)

PARTS IDENTIFICATION/NOMENCLATURE
The service procedures and specifications in this publication cover the Spicer Axles
listed in the charts below.
For Spicer Brake service information, refer to BRSM-O033 Service Manual.
For shift system service information refer to Spicer Shift System Manual AXSM-0029
For Parts identification, refer to your appropriate Spicer parts manual, reference
Spicer product literature order form TCFM-0018 for listings.
Early Axle Series
Axle Axle Model Nos.
Series 2-Speed Double Reduction
15 15201 15301
16 16244 16344
17 17201, 17221 17301, 17321
18 18201, 18221 18301, 18321
21 21221 21321
22 22221, 22223 22321
23 23221 23321
26 26221 26321
30 30227 30327
35 35327
NOTE: Throughout the manual, axle series identifica-
tion is used to indicate variances between axles.
Late Axle Models
Axle Model Nos.
2-Speed Double Reduction
15040T 15040P
19050T 19050P
19055T 19055P
19060T 19060P
21060T 21060P
21065T 21065P
22060T 22060P
22065T 22065P
23070T 23070P
23080T 23080P
23085T 23085P
26080T 26080P
26085T 26085P
30055P
35055P
Axle Identification
Axle and differential carrier identification is
either stamped on the carrier itself or on a
metal tag affixed to the carrier. Location on
the carrier is the same.
OLD STYLE TAG
Axle Specification Number
The complete axle is identified by the
specification number stamped on the rear
right-hand side of the axle housing. This
number identifies all component parts of the
axle as built by Spicer, including special
OEM requirements such as yoke or flange.
In addition, some axles may include a metal
METAL
identification tag (see illustration).
IDENTIFICATION
This tag only identifies the housing. It does not TAG
identify the differential carrier assembly components.
4
General
Information
-