Spicer TPCS Troubleshooting Guide: Older Systems (ECU's w_Dual Connectors) - Manual (Page 2)

2
The description and specifications contained in this service publication
are current at the time of printing.
Spicer ® reserves the right to discontinue or modify its models and/or
procedures and to change specifications at any time without notice.
Any reference to brand name in this publication is made as an example of
the types of tools and materials recommended for use and should not be
considered an endorsement. Equivalents may be used.
This symbol is used throughout this manual
to call attention to procedures where
carelessness or failure to follow specific
instructions may result in personal injury and/
or component damage.
Departure from the instructions, choice of
tools, materials and recom mended parts
mentioned in this publication may jeopardize
the per sonal safety of the service technician or
vehicle operator.
WARNINGS: Failure to follow indi­
cated procedures creates a high risk
of personal injury to the servicing
technician.
CAUTION: Failure to follow
indicated procedures may cause
component damage or malfunction.
NOTE: Additional service information not
covered in the service procedures.
Tip: Helpful removal and installation
procedures to aid in the service of this unit.
General Information
IMPORTANT NOTICE
Always use genuine Spicer replacement parts.
Every effort has been made to ensure the accuracy of all information in this guide. However, Spicer Axle and Brake Division makes no
expressed or implied warranty or representation based on the enclosed information.
Any errors or omissions may be reported to:
Dana Commercial Vehicle Products Group | 3939 Technology Drive | Maumee, Ohio, USA 43537