Troubleshooting, Pressure transducer – Spicer TPCS Troubleshooting Guide: Older Systems (ECU's w_Dual Connectors) User Manual
Page 28
Advertising
28
Troubleshooting
Code Description
Code 5C! displays when the Electronic Control Unit (ECU) receives
an unusually high or low reading from the pressure transducer. A
diagnostic tool will specify which of the two conditions is responsible for
setting the code.
Initial troubleshooting steps involve checking for a shortedtoground or
an open pressure transducer circuit.
If the circuits check out OK, secondary causes could involve a faulty
transducer or a faulty Electronic Control Unit.
See “Troubleshooting Tips” on page 20 for general guidelines on system
diagnostics.
Code:
5C!
Type:
Pressure Transducer
Advertising