Spicer Steer and Drive Wheel Ends Service Manual - Manual (Page 16)

14
Maintenance & Inspection
Steer Axle
1
For easy identification, note that the Dana LMS-Low Lube
brake uses a special “button head” grease fitting and the Dana
LMS-Lube Free brake does not have a grease fitting.
Type of Lubricant
System
Lubricant SAE Change Interval for
Line Haul Change Interval for
Vocational
Wheel End Mineral Oil SAE 75W-90 100,000 miles
[161,000 km] or 1 year 30,000 miles [48,000
km] or 6 months
Wheel End Mineral Grease - NLGI #2 #2 grade 100,000 miles
[161,000 km] or 1 year 30,000 miles [48,000
km] or 6 months
LMS-Low Lube
1 Synthetic Oil SAE 50
PS-164 Rev 7
250,000 miles
[400,000 km] or 1 year 250,000 miles
[400,000 km] or 1 year
LMS-Lube Free
1 Synthetic Oil SAE 50
PS-164 Rev 7
None (only needed if
tear down) None (only needed if
tear down)
LMS-Low Lube
1 Semi-Fluid Synthetic Grease Chevron Delo
SF 50,000 miles [800,000
km] or 3 years 50,000 miles [800,000
km] or 3 years
LMS-Low Lube
1 Semi-Fluid Synthetic Grease Mobilith SHC
007 50,000 miles [800,000
km] or 3 years 50,000 miles [800,000
km] or 3 years
King Pin Joint Grease /
Tie Rod Ends Heavy-Duty, multipurpose
lithium based
#1 grade or
#2 grade 25,000 miles [40,000
Km] or 6 months Every 50 hours