Spicer Single Drive Axles Service Manual: S110 and S130 - Manual (Page 31)

28
Wheel Differential Assembly
11. Place thrust washer on the side gear. Lubricate both
sides of the thrust washer before installing.
12. Install the side gear and thrust washer in the differ-
ential case.
13. Start the full differential shaft into the shaft bores in
the case that does not have a locking pin hole.
14. Install a side pinion and thrust washer and push the
shaft through the side pinion.
15. Install the side pinion and thrust washer to the other
side of the full shaft.
16. Install a side pinion and thrust washer on the half
shaft side.
17. Install the half shaft so that the pin is facing upward
and push it in until it stops.
Side Pinion
and Thrust
Washer
Full
Differential
Shaft
Locking
Pin Holes
Side Pinion
and Thrust
Washer
Side Pinion
and Thrust
Washer
Pin Hole
Facing
Upward
Half
Differential
Shaft