Trade Mark Broderson IC-200 - Manual (Page 5)

MODEL:
IC-200-2G Industrial Crane with
15’ 2”-36’ 2” Boom
IC-200-3G Industrial Crane with
15’ 6”-50’ 0” Boom
ENGINE OPTIONS:
Diesel Engine
Cummins QSB3.3 Turbocharged
Spark Arrester Muffl er
Installed in addition to standard
muffl er.
Catalytic Convertor
Reduces engine emissions.
Engine Heater
Engine coolant heater installed
to circulate warm water through
engine, plugs into 120 volt AC.
AXLE & STEERING OPTIONS:
4-Wheel Steer & 2-Wheel Drive
4-Wheel Steer & 4-Wheel Drive
TIRE OPTIONS:
Non-Marking Tires
Foam Filling of Tires
Spare Tire & Wheel
CHASSIS OPTIONS:
Auxiliary Winch
Mounted behind front bumper,
hydraulically driven with control in
operator’s console.
Pintle Hook:
Pintle Hook, Rear
Pintle Hook, Front
Headlight and Taillight Grilles
Welded steel protective grilles for
headlights and taillights.
Rearview Mirrors
One mounted on right-hand deck
stake and one mounted on lefthand
deck stake.
OPERATOR COMPARTMENT
OPTIONS:
Operator Guard
Tubular steel weldment with heavy
expanded steel mesh top section.
Operator Guard Cover
Clear vinyl cover over Operator
Guard, for inclement weather
operations.
All Weather Cab
Rigid-mounted canopy section and
removable hinged door. Includes
heater, electric wind-shield wiper,
one sliding glass window in the
door and one in the right side of
canopy. Defroster fan and dome
light included.
Cab Heater Only
Heater with two-speed fan for units
without All Weather Cab.
Windshield Washer
Includes reservoir, pump &
nozzle.
Floor Mat
Vinyl mat with foam backing.
Operator Suspension Seat
Provides additional comfort for
operator.
Noise Reduction Kit
Includes fl oor mat, control valve
cover and side panels of foam
backed vinyl for noise reduction.
Air Conditioning
Air Conditioner w/134 coolant.
ELECTRICAL OPTIONS:
Strobe Lights
Yellow strobe light mounted on
each side of turret weight box.
One work light mounted to boom
to light boom tip and one work light
mounted to turret to light ground
under boom tip.
Boom Work Lights
One work light mounted to boom
to light boom tip and one work light
mounted to turret to light ground
under boom tip.
Work Lights - Rear
Two works lights recessed in rear
bumper.
BOOM ATTACHMENTS:
Boom Extension, 15 Ft. (2G Only)
Swing away and boom stowable.
Boom Extension, 15 Ft., Offsettable
(2G Only)
Same as above except the
boom extension is offsettable to
3 different positions; 0 degree
(inline), 15 degree and 30 degree
offset.
Boom Extension, 16 Ft., Offsettable
(3G Only)
Same as above except the boom
extension is 16 ft.
Sheave Block - Two-Part Line
Searcher Hook:
Nose Mount
Listed below are brief descriptions of options available for this product.
Consult the IC-200-G Engineering Spec for additional information.
IC-200-G
Options
Form #GC108E (10/08) © 2008, Broderson Manufacturing Corp.
Should you require an option or special equipment not listed please consult your dealer salesperson or BMC ® .
Tel (913) 888-0606
Fax (913) 888-8431
www.bmccranes.com Dimensions and values shown are
for reference purposes only.
Specifi cations subject to change.
Manufacturing Corp.
14741 West 106th Street
Lenexa, KS 66215 USA