TROY Group Hewlett-Packard LaserJet 9000 Font DIMM Kit Installation Guide - Manual (Page 7)

DIMM Installation Guide
4. Replace the printer side panel by hooking the tab on the right-hand edge of the panel into the slot on the
printer body (Figure 5 and Figure 6), and then swinging the panel toward the printer until it snaps into place.
Figure 5 Figure 6
5. Reconnect the printer power cord and printer data cable.
6. Refer to the TROY Quick-Start Guide (provided with your TROY DIMM Solution) for instructions on
installing the required TROY software and support files.
NOTE: If assistance is required for removing or installing the DIMM, please call TROY Technical
Support at (800) 332-6427. Customers outside the United States, please call (304) 232-0899.
Document #50-70395-001 Rev. D
Page 7 of 22