TROY Group MICR_IRD 3005 Security Printing Solutions User’s Guide - Manual (Page 101)

Section 6 Using the Printer Control Panel
Security Printing Solutions User’s Guide -- 50-70410-002 Rev. A
6-3
Entering the
Administrator
Password
(9050
Series Printers)
Saving Printer
Settings
T O ENTER THE ADMINISTRATOR PASSWORD (9050 S ERIES P RINTERS ):
1. Press the W button until
TROY MENUS
appears, and then press the  button.
2. Press the W button until SECURITY MENU
appears, and then press the  button.
3. Press the W button until USER ID
appears, and then press the  button.
4. Press the W button until
ADMIN
appears, and then press the  button.
5. Press the W button until PASSWORD
appears, and then press the  button.
6. Use the numeric keypad to enter each character of your password, and then press the  button. Repeat this
step until all characters of your password have been entered, and then press the  button again.
In the event that a cold reset is performed on your TROY printer due to servicing and/or firmware updates, all
TROY-managed variable values will be lost, and therefore, will require re-entry by the user. TROY Security
Printing Solutions provide the ability to save and restore all TROY-managed variable values.
T O SAVE OR RESTORE TROY- MANAGED VARIABLE VALUES ( ALL PRINTER MODELS ):
1. Press the W button to select
TROY MENUS
, and then press the  button.
2. Press the W button to select
SECURITY MENU
, and then press the  button.
3. Ensure ACTION is highlighted, and then press the  button.
4. Press the W button to select LOG IN , and then press the  button.
5. Press the W button to select USER ID , and then press the  button.
6. Press the W button to select the letter A , and then press the  button. Repeat this process until you have
entered the word
ADMIN
. Press the  button three more times to continue.
7. Press the W button to select PASSWORD , and then press the  button.