Velleman К8062 - Manual (Page 7)

7
Construction
 IC1 : SN75176BP or MAX485
 IC2 : VK8062
(programmed PIC18F2550)*
17. IC’s check the position !
Solder the 3-pole female print connector to the XLR connector using the figure
below to check the accuracy of the connections (see fig. 2.0 & 3.0).
Now mount the female 3-pole XLR connector in the provided opening in the
upper part of the housing, securing it with the included selftapping screws (flat
head 2.9 x 6.5mm), see figure 4.0.
19. XLR socket.
Affix the supplied CE/FCC sticker on
the bottom of the housing, see fig.
1.0.
18. CE/FCC Sticker
Fig. 4.0
Velleman
SFCC
Tested to comply with
FCC standards for
home and office use
FIG. 1.0
Fig. 2.0
Brown
Red
Orange
Orange
Red
Brown
Fig. 3.0
* firmware rev. 3 or higher