Velleman К8062 - Manual (Page 8)

8
 Fix the PCB using 4 screws ( 2.9 x 6,5mm).
 Connect the wired connector to 3p header (SK3).
 If stand alone function is used, connect the battery to the connector and in-
sert the battery in the battery compartment as indicated in fig. 5.0.

Close the enclosure with the longest supplied screws (2.9 x 9.5mm).
 Affix the supplied front sticker on the top of the enclosure.
20. Assembly
Assembly
Remark : Respect your national
and local laws when disposing of
empty batteries.
Fig. 5.0