English – Velleman projects VMB1TC Short user manual User Manual

Page 9

Advertising

6. Setting the clock

ENGLISH

It is important to set the correct time for the internal clock.
Setting the time on this module will synchronise all clocks in your Velbus system.

When applying power to the controller for the first time,

only the time is shown on the display.

1. Open the “short” menu by pressing the ‘Menu’ button.

2. Scroll to "clock set" menu using ↑ or ↓ buttons.

3. Select the set clock menu using the → button. The day-

indication flashes.



Set the day using ↑ or ↓ buttons.



Confirm using the → button. The hour-indication flashes.



Set the hour using ↑ or ↓ buttons.



Confirm using the → button. The minutes-indication flashes



Set the minutes using ↑ or ↓ buttons.

4. Confirm using the → button to start the clock from the set

time.

5. Exit the menu using the button.

See display & menu overview on page 21 & 22

↑

Advertising