Velleman projects VMBDMI Short user manual - Manual

Dimmer for inductive / resistive load
Firmware upgradeable through the Velbus ® system.
Configuration: via PC.
1-channel 400W dimmer. Create an atmosphere which suits you best or let your
lights dim slowly to avoid unexpected surprises. It is also possible to simulate a
sunrise which makes waking up a lot more pleasant!
Features
leading edge phase control
soft on or off will prolong the lamp's life
thermal protection
protection at too inductive load (can be disabled for dimmable led lamps)
operation modes: dimming - slow on/off - timer - multistep dimmer - moods ...
timer: 1s ... 3 days
dimspeed: 2s ... 23 hours
Specifications
required mains voltage: 220-240V/50Hz
maximum load: 400W
dimming from 0 to 100% in 4 seconds
built-in non-resettable fuse
power supply: 12...18Vdc
consumption: 30mA
dimensions: 90x36x58mm / 3.5x1.4x2.3"
Velbus Home Automation
Choosing Velbus is choosing comfort, safety and energy saving with the guarantee that your home is
ready for the future. All this for a price barely higher than that of a traditional installation.
VMBDMI