Velleman К8082 - Manual (Page 14)

14
(5) ENTER YOUR CODE
Entering the code
At first turn-on, the unit responds to factory code (1 - 0 - 1 - 0) only.
To compose the code:
1) turn clockwise to 1
2) turn counter clockwise to 0
3) turn clockwise to 1
4) turn counter clockwise to 0
5) turn clockwise
if you make a mistake, restart from 1
The relay turns on and the 'lock open'-symbol is displayed.
To turn off the relay, turn knob in any direction
Remark: When the unit remains idle for a while and the relay is off, then the display will show
an animation.
The status of the relay is always shown by the decimal point (dp ON = relay ON)